Antennas • CCTV • Data
Next Antenna service guides

What to check before booking CCTV installation

Person standing near an outdoor power point checking the eave of a Melbourne home before a CCTV camera installation

Booking a CCTV installation is easy. Getting the most out of the visit takes a little more thought. A few checks beforehand mean the installer can get straight into the work, rather than spending the first hour working out what’s possible on your property.

Here’s what’s worth looking at before you make the call.

Booking checklist


Five details to work out before the installer arrives

01

Coverage

  • List the doors, paths and areas you want to see.
  • Decide whether identification or general activity matters more.
02

Cable routes

  • Check roof, wall and ceiling access.
  • Note any concrete, double-storey or finished areas.
03

Recorder position

  • Choose a ventilated and reasonably secure location.
  • Allow access to power and the property network.
04

Remote viewing

  • Know which phones or computers need access.
  • Check whether the internet connection is stable.

You do not need every answer before booking, but these details make the first discussion much more useful.

Where do you actually want cameras?

Have a rough idea of the areas you want covered before the installer arrives. Common spots include:

  • Front door and driveway
  • Side access or gates
  • Back yard or rear entry
  • Shopfront or till area for businesses
  • Car parks or loading areas

You don’t need exact camera positions worked out. That’s part of what the installer will help with on site, since mounting height, roof lines and sight angles all affect where a camera actually works best. But knowing your priority areas helps the conversation move faster and gives the installer a starting point.

If you’re still working out where cameras make the most sense around a shop or office, it’s worth reading our guide on best places to install security cameras around a shop or office before you book.

Check what power is available near each camera spot

Most CCTV cameras need a power source close to where they’re mounted. Before booking, walk around the property and note whether there’s:

  • An existing power point near the proposed camera location
  • A switchboard or fuse box that’s reasonably accessible
  • Any areas where power would need to be run a long distance

If a camera spot is nowhere near existing power, that’s not a dealbreaker, but it does affect how the job is planned. It may mean extra cable runs or a different camera position altogether. Flagging this upfront, even just in a phone call, helps the installer scope the job properly.

Think about internet and network access

Many modern CCTV systems record to a network device or allow remote viewing through an app. That means the cameras or the recorder need some kind of connection back to your router or network switch.

Before booking, check:

  • Where your router or main network point is located
  • Whether Wi-Fi signal reaches the areas where cameras will go
  • Whether there’s already data cabling run to key points in the building

If your property has poor Wi-Fi coverage in the areas you want covered, or no existing network cabling to a garage, shed or second building, this is worth mentioning when you book. In some cases, running dedicated data cabling gives a more reliable result than relying on Wi-Fi alone, particularly for outdoor cameras or larger properties. If that sounds like your situation, it’s worth looking at what a data cabler can do alongside a camera install, or checking whether a Wi-Fi installation would solve the coverage gap first.

Check if you have an existing system already

If you’re replacing or adding to an existing CCTV setup, take note of:

  • How many cameras are currently installed
  • Where the recorder or NVR is located
  • Whether existing cabling is still usable
  • Any known faults, like a camera that’s stopped working or a recorder that won’t play back footage

This information helps the installer understand whether they’re working with a clean slate or need to assess what’s already there. It also means fewer surprises once the job is underway.

Consider access and site conditions

Think about how the installer will physically reach the areas where cameras are going. This matters more for:

  • Two storey homes where eave-mounted cameras need a ladder
  • Commercial buildings with high ceilings or roof access requirements
  • Properties with locked gates, tenants, or areas that need prior notice to access

If there’s anything that might restrict access on the day, such as a locked roof hatch or a tenant who needs advance warning, mention it when booking. It avoids delays and means the visit can be planned properly.

Decide who needs to see the footage

This affects how the system gets set up, not just where cameras go. Ask yourself:

  • Do you want to view footage remotely on your phone?
  • Will staff or family members need separate access?
  • Is footage mainly for review after an incident, or do you want live monitoring?

You don’t need to have this fully sorted before booking, but having a general idea helps the installer recommend a setup that matches how you’ll actually use it.

Check any body corporate or landlord requirements

If you’re in a strata property, rental, or commercial tenancy, there may be rules around what can be mounted on shared walls, common property, or the building exterior. It’s worth checking your lease or strata rules, or asking your landlord or body corporate, before cameras go in. This isn’t something an installer can resolve on your behalf, so sorting it out ahead of the visit avoids having to reschedule.

Have a rough budget range in mind

Costs vary depending on the number of cameras, cable runs required, and whether existing infrastructure like power and data points are already in place. You don’t need exact figures before booking, but having a rough sense of what you’re comfortable spending helps guide the conversation about camera numbers and coverage.

Booking the visit

Before confirming a booking, it helps to know whether the proposed camera locations, cable paths and recorder position are all workable. The CCTV Camera Installation Melbourne service page explains the installation work Next Antenna can discuss for homes and businesses.

If you’re weighing up whether your setup should look different as a home versus a business, our next article covers CCTV for homes vs businesses and what actually changes between the two.

Need help with the setup itself?

Tell Next Antenna what is happening at the property and what you want the system to do. You will get practical advice on the next step.

More service guides